•
Flashing red:
is on hold (normal) at another unit.
*1
Soft Button Icons
Soft buttons icons are displayed for functions that can be used depending on the screen displayed and the
state of the unit. If
More
is displayed, you can press it to display other available soft button icons. See
Page 18 for a list of commonly used soft button icons.
Icons
Status Icons
Status icons indicate the status of the unit and are displayed at the top of the screen in the status bar.
Icon
Description
Displayed when the ringer is turned off (Page 20).
Displayed when
[HEADSET]
is pressed.
Displayed when the connection to the LAN is lost. If this icon is displayed, check
the Ethernet cable connection.
Displayed when ECO mode is enabled.
Displayed when a firmware upgrade is available.
Line Icons
Line icons indicate the status of lines in the Phone screen.
General Line
Icon
Shared Line
Description
Displayed when registering to the SIP server.
Displayed when registration to the SIP server has been lost. If this icon
is displayed, consult your administrator or dealer.
Indicates the line is registered to the SIP server.
Displayed when the line is on a call.
Displayed when the line has an incoming call.
Displayed when there is a held call recalling.
Indicates that DND (Do not Disturb) settings are active for the line.
Indicates that call forwarding settings are active for the line.
Indicates that auto answer settings are active for the line.
16
Operating Instructions
Document Version 2014-11
Before Operating the Telephone
Содержание KX-UTG200
Страница 64: ...Connections for Handset 64 Operating Instructions Document Version 2014 11 Installation and Setup...
Страница 97: ...Document Version 2014 11 Operating Instructions 97 Notes...
Страница 98: ...98 Operating Instructions Document Version 2014 11 Notes...
Страница 99: ...Document Version 2014 11 Operating Instructions 99 Notes...