4.3.1.1 Connection Settings
Host Name
Description
Specifies the host name for the unit to send to the DHCP server.
Note
•
This setting is available only when
[Connection Mode]
is set
to
[DHCP]
.
Value Range
Max. 63 characters
Note
•
You cannot leave this field empty.
•
If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.
Default Value
{MODEL}
IP Address Mode
Description
Specifies whether the unit operates in IPv4 mode, IPv6 mode, or both.
Value Range
•
Dual stack
•
IPv4 only
•
IPv6 only
Default Value
Dual stack
Configuration File Reference
Signal Prefer Mode
Description
Specifies the preferred IP mode (IPv4 or IPv6) for sending SIP packets.
Value Range
•
IPv4
•
IPv6
Default Value
IPv4
Configuration File Reference
IP_MODE_PREF_SIGNAL (Page 220)
Media Prefer Mode
Description
Specifies the preferred IP mode (IPv4 or IPv6) for sending voice
packets (RTP).
Value Range
•
IPv4
•
IPv6
Default Value
IPv4
Configuration File Reference
80
Administrator Guide
Document Version 2014-04
4.3.1 Basic Network Settings
Содержание KX-UTG200
Страница 188: ...188 Administrator Guide Document Version 2014 04 4 9 4 Sniffer Dump...
Страница 284: ...284 Administrator Guide Document Version 2014 04 5 8 SSH Settings...
Страница 302: ...302 Administrator Guide Document Version 2014 04 7 5 SSH Settings Debug Settings...
Страница 303: ...Index Document Version 2014 04 Administrator Guide 303...