Panasonic KX-UTG200, Руководство администратора

Страница: 111 / 312

Default Value 0
Configuration File Reference DSCP_SIP (Page 272)
4.5.1.13 SIP extensions
Supports 100rel (RFC 3262)
Description Selects whether to add the option tag 100rel to the "Supported" header
of the INVITE message. For details, refer to RFC 3262.
Value Range •
Yes
•
No
Note
•
If you select [Yes] , the Reliability of Provisional Responses
function will be enabled. The option tag 100rel will be added to
the "Supported" header of the INVITE message and to the
"Require" header of the "1xx" provisional message. If you select
[No] , the option tag 100rel will not be used.
Default Value No
Configuration File Reference SIP_100REL_ENABLE (Page 275)
Supports Session Timer (RFC 4028)
Description Specifies the length of time, in seconds, that the unit waits before
terminating SIP sessions when no reply to repeated requests is
received. For details, refer to RFC 4028.
Value Range 0, 60–65535 (0: Disable)
Default Value 0
Configuration File Reference SIP_SESSION_TIME (Page 272)
4.5.1.14 NAT Identity
Keep Alive Interval
Description Specifies the interval, in seconds, between transmissions of the Keep
Alive packet to the unit in order to maintain the NAT binding information.
Note
•
This setting is available only when [Transport Protocol] is set
to [UDP] .
Value Range 0, 10–300 (0: Disable)
Default Value 0
Configuration File Reference PORT_PUNCH_INTVL (Page 276)
Document Version 2014-04 Administrator Guide 111
4.5.1 SIP Settings [Line 1]–[Line n]