Panasonic KX-UT248-B, Руководство администратора

Страница: 279 / 306

Button Description Lamp Indication
BLF Used to show the current status of another
extension, call the extension and transfer
calls to it.
This button can also be used to perform
Directed Call Pickup (
®
see [Direct Call
Pickup] in 4.6.1.1 Call Control in the Web
user interface or
"
NUM_PLAN_PICKUP_DIRECT
" in 5.5.1 Call
Control Settings in the configuration file).
Note
•
BLF (Busy Lamp Field) is an optional
feature and may not be supported on
your phone system.
•
It may be necessary to specify the
Resource List URI to use this feature,
depending on your phone system (
®
see [Resource List URI] in
4.6.2.1 Call Control in the Web user
interface or
"
RESOURCELIST_URI_n
" in
5.7.1 Call Control Settings in the
configuration file).
Off : The BLF extension is idle.
Red on : A corresponding BLF extension is
using the line.
Flashing red rapidly : The BLF extension is
receiving an incoming call.
ACD Used to log in or log out of a group when ACD
(Automatic Call Distribution) is enabled.
Note
•
ACD is an optional feature and may
not be supported on your phone
system.
Off : Logged in
Red on : Logged out
Wrap Up The Wrap Up button alternates the setting of
Wrap Up mode, Not Ready mode or Ready
mode for incoming calls.
In Wrap Up mode/Not Ready mode for
incoming calls, incoming calls will not be
received through the ACD (Automatic Call
Distribution) group. Off : Ready mode for incoming calls
Red on : Not Ready mode for incoming calls
Flashing red : Wrap Up mode
6.3.1 Flexible Button Settings
To set Flexible Buttons
1.
In the Web user interface, click the [Telephone] tab, and then click [Flexible Button Settings] .
2.
Enter settings as described in the following table.
When it is necessary to set both parameter 1 and parameter 2, enter a comma between the values.
Document Version 2012-06 Administrator Guide 279
6.3.1 Flexible Button Settings