details, see "Unlocking the Phonebook
Temporarily (Page 38)".
•
While transferring phonebook data from a cell
phone using Bluetooth, the Bluetooth
pictograph will not be displayed on the screen
of the handset (see "Display (Page 18)").
Transferring vCard Data using
Bluetooth
vCard™ is a standard file format for an electronic
business card. A vCard can include a name and phone
numbers. You can save this vCard data to the handset
using Bluetooth wireless transmission.
Note
•
Only version 2.1 of vCard is supported.
•
If both the name and phone number of a
phonebook item being transferred corresponds
with existing data in the handset, the
phonebook item will not be transferred. Also,
phonebook entries without any phone numbers
entered will not be transferred to the handset.
•
If multiple phone numbers exist for one name
item, only the first 6 phone numbers received
will be saved. Any numbers beyond the first 6
received will not be saved to the handset.
•
Phone numbers that contain more than 32 digits
will not be saved to the handset.
•
Phonebook names can contain up to 24
characters. Names over 24 characters in length
will be shortened to 24 characters when
transferred. Note that if extended characters
are used, the length of the name transferred
may be further reduced.
Assigning Hot Keys
You can assign a phone number stored in the
phonebook to a key to be used as a Hot Key.
1.
In standby mode, press and hold a dial key (0–9) for
more than 1 second.
2.
Press
.
3.
Press
[ ]
or
[ ]
to select "
Copy from P.book
",
and then press
.
4.
Press
[ ]
or
[ ]
to select an entry, or press
to search for an entry, and then press
.
5.
Press
[ ]
or
[ ]
to select a number, and then press
.
6.
Press
.
Note
•
For details about searching for an item in the
phonebook, see "Searching for an Item in the
Phonebook (Page 27)".
Selecting the Type of Hot Key Dialing
You can select one of 2 types of Hot Key Dialing for
each assigned Hot Key.
1.
In standby mode, press and hold a dial key (0–9) for
more than 1 second.
2.
Press
.
3.
Press
[ ]
or
[ ]
to select "
Automatic Call
", and
then press
.
4.
Select "
Manual
" or "
Auto
", and then press
.
•
Manual
: Pressing and holding an assigned Hot Key
for the set number of seconds will display the Hot
Key’s information. Then, press
to dial the Hot
Key’s assigned number. Alternately, when the Hot
Key’s information is displayed, you can press
FLEX
and select a DN key to dial using the line
assigned to the DN key.
•
Auto
: Pressing and holding an assigned Hot Key
for the set number of seconds will dial that Hot
Key’s assigned number immediately.
Note
•
To select the number of seconds before the
call is automatically made, see "Key Option
(Page 48)".
Document Version 2013-03
Operating Instructions
39
Customizing the Telephone