Panasonic KX-UDS124 Скачать руководство пользователя страница 139

Страница: 139 / 292

2.7.3 Firmware Maintenance

This screen allows you to perform firmware updates automatically or manually.

2.7.3.1 Firmware Maintenance

Enable Firmware Update

Description

Selects whether to perform firmware updates when the SIP-CS detects
a newer version of firmware.

Note

•

Changing this setting may require restarting the SIP-CS.

•

Local firmware updates from the Web user interface (

see

2.7.4 All Firmware Update

) can be performed regardless of

this setting.

•

Firmware updates using TR-069 can be performed regardless
of this setting.

Value Range

•

Yes

•

Default Value

Yes

Firmware File URL

Description

Specifies the URL where the firmware file is stored.

Note

•

This setting is available only when

[Enable Firmware

Update]

is set to

[Yes]

•

Changing this setting may require restarting the SIP-CS.

Value Range

Max. 500 characters

Document Version 2013-03

Administrator Guide

139

2.7.3 Firmware Maintenance

Содержание KX-UDS124





































































































































































































































































































Результаты поиска

Содержание KX-UDS124

Отзывы:

Panasonic KX-UDS124, Руководство администратора, Страница: 139 / 292

Результаты поиска

Содержание KX-UDS124

Отзывы: