manualshive.com logo in svg

Panasonic KX-UDS124, Руководство администратора, Страница: 140 / 292

Поделиться
Скачать
Panasonic KX-UDS124 Скачать руководство пользователя страница 140

Default Value

Not stored.

PS Update Type

Description

Selects whether to display a confirmation message asking the user to
perform a firmware update (manual) or perform the firmware update
without asking the user (automatic) when the S-PS detects a newer
version of firmware.

Note

•

This setting is available only when 

[Enable Firmware

Update]

 is set to 

[Yes]

.

•

Changing this setting may require restarting the SIP-CS.

Value Range

•

Automatic

•

Manual

Default Value

Automatic

2.7.4  All Firmware Update

This screen allows you to manually update the firmware of all SIP-CSs from a PC by clicking 

[All Update

Firmware]

.

Note

•

After the firmware has been successfully updated, the SIP-CS will restart automatically.

140

Administrator Guide

Document Version  2013-03  

2.7.4 All Firmware Update

Содержание KX-UDS124





































































































































































































































































































Отзывы:

Нет отзывов