6
7. The web interface displays the version information.
8. Now you select:
(1.) System
(2.) CS Management, then the CS Management window appears
(3.) Select Start CS Registration
9. First of all, there appears a message, if you want to proceed, because if you continue ALL
running connections wil be disconnected!
Push OK, to continue.
10. All search over all channels is done and all slaves found are displayed. (1.) you can see the
MAC-address.
(2.) Trying continues to blink, it might be that you want to connect more than one slave. If
you should see your slave and you want to stop the search, you stop the search by pushing
(3.) Stop CS Registration.
11. Now you have installed a master/slave system and your slave LED ilights GREEN.
2.3. Adding DECT mobile handsets KX-UDT1x1
The KX-UDT-1X1 mobile handsets are registered to your phone system by the next steps:
No. Description
Picture
