Panasonic KX-TVP200 Скачать руководство пользователя страница 329

Страница: 329 / 408

MESSAGE MANAGER'S GUIDE

Installation Manual

329

Recording Menus and Voice Labels

Log in the Main Menu.

Press [5] to modify messages.

Select the desired number to be recorded.

•

[1] Record the Company Greetings.

•

[2] Record the Company Name.

•

[3] Record the Department Dialling Menu.

•

[4] Record the Custom Service Menus.

•

[5] Record the Voice Labels for System Group Distribution Lists.

•

[7] Record the Multilingual Selection Menu.

For the item selected in Step 3, follow these steps:

•

For the Company Greetings—Enter the Company Greeting Number (1-32).

•

For the Company Name—Go to Step 5.

•

For the Department Dialling Menu—Go to Step 5.

•

For the Custom Service Menus—Enter a Custom Service Number (1-100).
Enter [0] to record the Custom Service exit prompt.

•

For the Voice Labels—Enter a System Group Distribution Lists number to be
labeled. (The System Administrator assigns list numbers.)

•

For the Multilingual Selection Menu—Go to Step 5.

The VPS plays the current message. Press [1] to change the message. If a message has not
yet been recorded, go to Step 7.

Press [1] to record the message. Press [2] to erase the current message and return to Step 3
or 4.

Record the message at the tone and Press [1].

Press [2] to accept the message.

Note

•

Press [1] to review the recorded message.

•

Press [3] to erase the recorded message and try again—Return to Step 7.

•

Press [4] to add a message.

•

Press [ ] to erase the recorded message and exit—Return to Step 3.

Содержание KX-TVP200

























































































































































































































































































































































































































Результаты поиска

Содержание KX-TVP200

Отзывы:

Похожие инструкции для KX-TVP200

Бренды по названию

Популярные бренды

Panasonic KX-TVP200, Руководство по установке

Результаты поиска

Содержание KX-TVP200

Отзывы:

Похожие инструкции для KX-TVP200

Бренды по названию

Популярные бренды