Panasonic KX-TS840MX, Руководство по эксплуатации

Страница: 7 / 24

Connections
Connect the handset cord ( A ) to the handset and the unit. Connect the telephone
line cord until it clicks into the unit and telephone line jack ( B ). After line connection,
lift the handset to check for a dial tone.
DSL/ADSL filter*
To single-line
telephone jack
1
2
R Use only a Panasonic handset for KX-TS840MX.
R Use only the supplied telephone line cord. Using another telephone line cord may
not allow the unit to work properly.
*DSL/ADSL filter (not supplied) is required if you have DSL/ADSL service.
Initial setting
Dialing mode
If you cannot make calls, change this
setting according to your telephone line
service.
The default setting is TONE.
TONE: For tone dial service.
PULSE: For rotary/pulse dial service.
1
Lift the handset.
2
M PROGRAM N
R Status indicator light will start
double flashing at an interval.
3
M HOLD/MODE N
®
M 3 N
4
To select TONE, press M 1 N .
or
To select PULSE, press M 2 N .
5
M PROGRAM N
R A long beep sounds.
R Status indicator light will turn OFF.
6
When finished, hang up.
7
Preparation