Panasonic KX-TS620FX, Руководство по эксплуатации, Страница: 37 / 60

Direct Dial (M1, M2, M3)
37
To erase a stored number
1
Press the required Direct Dial
button (
{
M1
}
,
{
M2
}
or
{
M3
}
).
2
Press
{
ERASE
}
.
• To stop erasing, press
{
3
}
(
No
key).
3
Press
{
OK
}
(
Yes
key).
• A long beep sounds, the
information is erased, then
“
Memory Empty
” is displayed.
• To exit the programming mode, press
{
EXIT
}
or wait for 60 seconds.
• When using the Dial Lock (p. 42) or Call
Restriction feature (p. 43), you cannot
erase a phone number in the Direct Dial
memory (
{
M1
}
,
{
M2
}
or
{
M3
}
).
• If a pause is required for dialling, press
{
PAUSE
}
where needed. If required, you
can also store
{
FLASH
}
in a phone
number. Pressing
{
PAUSE
}
or
{
FLASH
}
counts as one digit (p. 38, 40).
Dialling a Stored Number
from the Direct Dial Memory
1
Lift the handset or press
{
SP-PHONE/HEADSET
}
.
2
Press the required Direct Dial
button (
{
M1
}
,
{
M2
}
or
{
M3
}
).
• The stored number is displayed
and dialled.
OR
1
Press the required Direct Dial
button (
{
M1
}
,
{
M2
}
or
{
M3
}
).
• The stored number is displayed.
2
Lift the handset or press
{
SP-PHONE/HEADSET
}
.
• When you press the Direct Dial buttons
continuously, confirm that the first dialling
out have complete, then press the next
button.
• You can dial numbers stored in the Direct
Dial memory
(
{
M1
}
,
{
M2
}
or
{
M3
}
) even if
the Dial Lock (p. 42) or Call Restriction
feature (p. 43) is set.
TS620FX.book Page 37 Monday, July 17, 2006 4:00 PM