26
Storing Names and Phone Numbers in
Phonebook
You can store up to 50 names and phone numbers in memory.
Make sure that the handset is on the cradle and the SP-PHONE/
HEADSET indicator light is off.
1
Press
[FUNCTION/EDIT]
.
2
Press
[OK]
(
Yes
key).
3
Enter a name, up to 15 characters using
the dialling buttons
[0]
to
[9]
,
[
£
]
and
[#]
(p. 26).
• To move the cursor, press
[
2
]
or
[
1
]
.
• If a name is not required, go to step 4.
4
Press
[OK]
(
Next
key).
5
Enter a phone number up to 32 digits.
• If you have entered a wrong number,
press
[ERASE]
and enter the correct
number.
• If you want to change the storing name,
press
[
3
]
to reach the desired display
.
6
Press
[OK]
(
Save
key).
• The entered name and phone number are
displayed.
• If the display shows “
Phonebook full
” in step 2, press
[EXIT]
to exit the list. To
erase other stored items from the Phonebook, see page 31.
• You can exit the programming mode any time by pressing
[EXIT]
.
• If a pause is required for dialling, press
[PAUSE]
where needed. If required, you
can also store
[FLASH]
in a phone number. Pressing
[PAUSE]
or
[FLASH]
counts as one digit (p. 35, 37).
To store an emergency number (#):
Emergency numbers are numbers stored in the Phonebook that can be dialled even
when the Dial Lock (p. 39) or Call Restriction (p. 40) is set to ON.
To store a number as an emergency number, add # at the beginning of the name in
step 3.
Save phonebook ?
34
[OK]=Yes
Enter name
Tom Jones
4
[OK]=Next
Phonebook
10 items
0987654321
3
[OK]=Save
Enter phone No.
3
Tom Jones
0987654321
Phonebook
TS600FX.book Page 26 Wednesday, April 5, 2006 10:27 AM
