17
Basic Operation
To put a call on hold
Press
[
a
]
.
• The Speakerphone/headset
[
s
/
W
]
indicator
flashes.
• If using the handset, you can place it on the cradle.
• During the hold, both parties will hear a hold music. To cancel the hold music, see
page 36.
To release the hold
If the handset is on the cradle, lift the handset.
If the handset is off the cradle, press
[
a
]
.
If using the speakerphone, press
[
s
/
W
]
.
• If another phone is connected through the same line, you can also release the
hold by lifting its handset.
Answering Calls
When a call is received, the unit rings, the RINGER indicator flashes
quickly and “
Incoming call
” is displayed. You can answer a call by
simply lifting the handset.
If you subscribe to a Caller ID service, the calling party’s information will be
displayed when the unit is ringing (p. 18).
Using the speakerphone
1
Press
[
s
/
W
]
.
• The indicator lights.
2
Talk into the microphone.
3
To hang up, press
[
s
/
W
]
.
• The indicator light goes out.
• When the ringer volume is set to OFF (p. 13), the unit will not ring.
• The RINGER indicator will flash when
— someone picks up or hangs up another phone connected to the same phone
line.
This is normal.
TS600EX.book Page 17 Wednesday, April 5, 2006 12:25 PM
