Battery Replacement
29
If “
” flashes, the battery power is low. Install new batteries. Replace
the batteries within 1 minute to keep the programmed settings.
1. Press down in the direction of the
arrow and remove the cover.
2. Replace the batteries with new ones
using correct polarity (
i
,
j
), and close
the cover.
Battery Precautions:
The batteries should be used correctly, otherwise the unit may be damaged by
battery leakage.
—Do not mix different types of batteries.
—Do not charge, short-circuit, disassemble, heat or dispose of in fire.
—Remove all the batteries when replacing.
Note:
—If you do not install the batteries or if the battery power is low, the time will
be shown as “
12-00
” and “
” will flash. Readjust the time.
—Disconnect the telephone line cord before opening the battery compartment
cover.
—Replace all the batteries once a half year in use of Alkaline batteries, or
misoperation may occur. (When you use Manganese batteries, replace all of
them once in three months.)
—Do not use nickel-cadmium batteries.
≥
If the time is shown as “
12-00
” and “
” flashes after replacing the batteries,
readjust the time.
≥
Please replace the batteries while the handset is placed on the cradle.
+
-
-
+
+
-
1
2
Useful Information
