11
Basic Operation
Answering Calls
During speakerphone operation
For best performance, please note the following:
≥
Talk alternately with the other party in a quiet room.
≥
If the other party has difficulty hearing you, press VOLUME
(_)
to decrease
the speaker volume.
≥
You can switch to the handset by lifting it up. To switch back to the
speakerphone, press
(SP-PHONE/HEADSET)
.
While a call is being received, the unit rings and the ringer indicator
flashes. You can answer it by simply lifting the handset.
Using the speakerphone
1
Press
(SP-PHONE/HEADSET)
.
≥
The indicator lights.
2
Talk into the MIC
(microphone).
3
To hang up, press
(SP-PHONE/HEADSET)
.
≥
The indicator light goes out.
≥
When the ringer volume is set to OFF (p. 8), the unit will not ring.
MIC
Ringer Indicator
(SP-PHONE/HEADSET)
and Indicator
To put a call on hold
Press
(HOLD)
.
≥
The SP-PHONE/HEADSET indicator light flashes.
≥
If using the handset, you can place it on the cradle.
≥
During the hold, the caller will hear music. For canceling music, see page 18.
To release the hold
If the handset is on the cradle, lift the handset.
If the handset is off the cradle, press
(HOLD)
.
If using the speakerphone, press
(SP-PHONE/HEADSET)
.
≥
If another phone is connected on the same line, you can also release the hold by
lifting its handset.
≥
When you dial a phone number in using pulse line or lift the handset off the
cradle, the Ringer indicator also flashes. This is normal.
