Panasonic KX-TPA73, Руководство по эксплуатации

Страница: 60 / 161

3.1 Making Calls
• To enter characters, see 2.11 Entering Characters, page 55.
• You can confirm that the number was dialed correctly before calling (Predialing) by
entering the number, then press .
• To clear an entire number while predialing, press for more than 2 second.
• To cancel dialing, press .
• If flashes, move closer to the base unit and dial again.
• The "+" symbol (international dialing code) can be entered by pressing and holding the
"0" key.
• To insert "P" symbol (3 second pause) between phone numbers, press
*1
.
It is useful when you want to operate voice mail service without listening to pre-
recorded announcement, for example. Repeat as needed to create longer pauses.
*1
This soft key is displayed only when configured on the telephone. Contact your
administrator for further information.
3.2 Basic Calling
3.2.1 Calling by Dialing
1.
2. Dial the outside party’s number.
3. Press / /[CENTER], or wait the inter digit timer to timeout.
4. : End the call
Note
To dial a new number without going on-hook, follow the procedure below.
1. / : End the call
2. [ ]/[ ]: "Flash/Recall"
3. /[CENTER]
Predialing
[In standby mode]
1. Dial the number while on-hook.
2. After dialing, press .
3.1 Making Calls
60