Panasonic KX-TGP700 Скачать руководство пользователя страница 274

Страница: 274 / 399

SIP_DETECT_SSAF_n

For details about parameter names that include lower-case letters (e.g., "_n", "y", "x", or "m"), see
"4.2.1 Configuration File Parameters".

Value Format

BOOLEAN

Description

Specifies whether to enable SSAF for the SIP servers (registrar
server, proxy server, and presence server).

Value Range

•

: Enable SSAF

•

: Disable SSAF

Note

•

If set to "

", the unit receives SIP messages only from the

source addresses stored in the SIP servers (registrar server,
proxy server, and presence server), and not from other
addresses. However, if "

SIP_OUTPROXY_ADDR_n

" in

4.24 SIP

Settings

is specified, the unit also receives SIP messages

from the source address stored in the SIP outbound proxy
server.

Default Value

Web User Interface Reference

Enable SSAF (SIP Source Address Filter)

SIP_RCV_DET_HEADER_n

For details about parameter names that include lower-case letters (e.g., "_n", "y", "x", or "m"), see
"4.2.1 Configuration File Parameters".

Value Format

BOOLEAN

Description

Specifies whether to check the user name part of the SIP URI in the
"To" header when receiving the INVITE message with an incorrect
target SIP URI.

Value Range

•

: Enable username check

•

: Disable username check

Note

•

If set to "

", the unit will return an error reply when it receives

the INVITE message with an incorrect target SIP URI.

•

If set to "

", the unit will not check the user name part of the

SIP URI in the "To" header.

Default Value

SIP_RCV_DET_REQURI_n

For details about parameter names that include lower-case letters (e.g., "_n", "y", "x", or "m"), see
"4.2.1 Configuration File Parameters".

Value Format

BOOLEAN

Description

Specifies whether to check ReqURI that is the part of SIP URI in "To"
header when INVITE with wrong target SIP URI is received.

4.24 SIP Settings

274

Administrator Guide

Document Version: 2020-04

Содержание KX-TGP700
















































































































































































































































































































































































































Результаты поиска

Содержание KX-TGP700

Отзывы:

Panasonic KX-TGP700, Руководство администратора, Страница: 274 / 399

Результаты поиска

Содержание KX-TGP700

Отзывы: