Panasonic KX-TGP600, Руководство по эксплуатации

Страница: 61 / 112

Call Forwarding/Do Not Disturb
You can have incoming calls automatically forwarded to another destination. You can also have incoming
calls rejected (Do Not Disturb).
Note
R Do Not Disturb is available only when connected to a KX-TGP600.
To access the FWD/DND settings
1. In standby mode, press /[FUNC]/[FUNCTION], and then 2 ("Fwd/DND"
*1
).
2. If the unit has multiple lines, press [ D ] or [ C ] to select the desired line. a
OK
3. [ D ]/[ C ]: Select the type of FWD or DND setting to apply. a
OK
The settings are as follows:
R DND: Enable Do Not Disturb
*2
(All incoming calls are automatically rejected.)
R Fwd(All): Enable Forward All Calls
(All incoming calls are forwarded.)
R Fwd(Busy): Enable Forward Busy
(Incoming calls are forwarded only when your extension is in use.)
R Fwd(NA): Enable Forward No answer
(An incoming call is forwarded if you do not answer the call within a certain amount of time.)
4. If a Forward setting is selected, enter a new forward destination number, or confirm and modify a
previously set forward destination number. a
OK
*1 "Call Forward" when connected to a base unit other than the KX-TGP600.
*2 Only when connected to a KX-TGP600.
Note
R When Call Forwarding and/or Do Not Disturb is enabled, / Fwd and/or / DND appears on the
display in standby mode.
R FWD settings cannot be used on a shared line.
Listening to Voice Mail Messages (when connected to the
KX-TGP600 only)
When you receive a voice message, "Voice MSG" is displayed, and will appear.
You can check your new messages by accessing your mailbox.
[In standby mode]
1. Press and hold
KX-TPA60:
/ /[HOLD/MSG]
KX-TPA65:
/[MESSAGE]
2. [ D ]/[ C ]: Select the line on which is displayed. a
OK
Note
R Step 2 is not necessary if only one line is configured on the handset/desk phone.
R When using a KX-TPA60, this feature cannot be used when you have a call on hold.
61
Before Leaving Your Desk