Panasonic KX-TGP600, Руководство пользователя

Страница: 7 / 65

7
USER GUIDE
Panasonic DECT KX-TGP600 User Guide
Tips on Making Calls
• You can confirm that the number was dialed correctly before calling (Pre-dialing) by entering the number, then
KX-TPA60:
Press . KX-TPA65:
Off-hook
• To clear an entire number while pre-dialing, KX-TPA60:
Press
/[XFER/CLR] for more than 1 second .
KX-TPA65: Press /[TRANSFER] for more than 1 second .
• If an outside call is received from a phone number stored in the Handset Phonebook, the number and name of the caller will be displayed in
the call log .
• To cancel dialing, press KX-TPA60:
KX-TPA65:
/[CANCEL]
• If
flashes, move closer to the base unit and dial again .
• To insert a 3 second pause between phone numbers, press P *1 .
It is useful when you want to operate voice mail service without listening to pre-recorded announcement, for example . Repeat as needed to
create longer pauses .
*1 This soft key is displayed only when configured on the telephone . Contact your administrator for further information .
Receiving Calls
• You can select the ringer for each type of incoming call . See “Incoming Option”, “Appendix A” on page 25 .
• You can also use “Any Key Answer”*1, “Quick Answer”*1 or “Auto Answer” to answer a call . See “Answer Option”, “Appendix A” on page 25 .
• The volume of the ringer can be adjusted, or turned off . See “Adjusting the Ringer Volume or Turning the Ringer Off”, “Appendix A” on page
25 .
• If you attach a headset before receiving an incoming call, and headset ringer is set to “On”, ringing will be heard from the headset .
• Please consider the following when “Quick Answer”*1 is set to “On” . If a brief power failure occurs when the handset is receiving a call on the
charger,
– if “Talk On Charger” is set to “Off” (default), the call may be disconnected after being answered .
– if “Talk On Charger” is set to “On”, the call may be answered automatically . In this case, please note that privacy rights may be violated or
sensitive information may be transmitted to unauthorized parties .
•
Note:
To setup “Talk on Charger”, Use [MENU]
→
[Tools]
→
[Talk Option]
→
[Talk on Charger]
→
On
*1 KX-TPA60 only .