Useful Information
50
Document Version 2011-03
Programmable settings
Problem
Cause/solution
I cannot program items.
L
Programming is not possible while either another handset or
the base unit is being used. Try again later.
L
Programming is not possible while the base unit is downloading
data. Wait until the STATUS indicator stops flashing and lights
in steady green.
The display is in a language I
cannot read.
L
Change the display language (page 9).
While programming, the unit starts
to ring.
L
A call is being received. Answer the call and start again after
hanging up.
I cannot register a handset to the
base unit.
L
The maximum number of handsets (6) is already registered to
the base unit. Cancel unused handset registrations from the
base unit (page 40).
L
Place the handset and the base unit away from other electrical
appliances.
I have programmed the Call
forward/Do not disturb/Block
caller ID/Block anonymous calls,
but the unit does not work as
programmed.
L
The features may have been programmed by your
administrator. Contact your administrator for further
information.
L
Features set on your unit may be overridden by your phone
system settings.
L
Call forward (
“
Busy
”
/
“
No answer
”
) does not work when Do
