Panasonic KX-TGP500, Руководство администратора

Страница: 151 / 284

FIRM_UPGRADE_AUTO
Value Format Boolean
Description Specifies whether to display a confirmation message asking the user
to perform a firmware update (manual) or perform the firmware update
without asking the user (automatic) when the unit detects a newer
version of firmware.
Note
•
This setting is available only when
"
FIRM_UPGRADE_ENABLE
" is set to "
Y
".
•
Changing this setting may require restarting the unit.
Value Range •
Y
(Enable automatic firmware update)
•
N
(Disable automatic firmware update)
Default Value Y
Web User Interface Reference Update Type (Page 124)
FIRM_FILE_PATH
Value Format String
Description Specifies the URL where the firmware file is stored.
Note
•
This setting is available only when
"
FIRM_UPGRADE_ENABLE
" is set to "
Y
".
•
Changing this setting may require restarting the unit.
Value Range Max. 255 characters
Note
•
The format must be RFC 1738 compliant, as follows:
"<schema>://<user>:<password>@<host>:<port>/<url-path>".
–
"<user>" must be less than 64 characters.
–
"<password>" must be less than 64 characters.
–
"<user>:<password>@" may be empty.
–
The total of "<schema>://" and "<host>:<port>/<url-path>"
must be less than 128 characters.
–
":<port>" can be omitted if you do not need to specify the
port number.
•
If "{mac}" is included in this URL, it will be replaced with the
unit’s MAC address in lower-case.
•
If "{MAC}" is included in this URL, it will be replaced with the
unit’s MAC address in upper-case.
•
If "{MODEL}" is included in this URL, it will be replaced with the
unit’s model name.
•
If "{fwver}" is included in this URL, it will be replaced with either
"
FIRM_VER_EUDECT
" or "
FIRM_VER_USDECT
" depending on
the system. Note that this rule differs from other parameters
such as "
SIP_USER_AGENT
".
Document Version 2013-02 Administrator Guide 151
4.3.4 Firmware Update Settings