Alarm
An alarm sounds at the set time for 1 minute
and repeats 5 times at 5 minute intervals
(snooze function). You can also configure the
alarm to display a text memo. You can set 3
separate alarms for each handset. Each alarm
can be set to sound once, daily, or weekly.
When an alarm sounds, the message indicator
flashes rapidly if the handset message
indicator’s
“
Alarm
”
setting is enabled
Important:
R
Make sure the unit’s date and time setting
is correct (page 21).
1
M
MENU
N#720
2
MbN
: Select the desired alarm.
a
M
SELECT
N
3
MbN
: Select the desired alarm option.
a
M
SELECT
N
“
Off
”
Turns alarm off. Go to step 10.
“
Once
”
An alarm sounds once at the set time.
“
Daily
”
An alarm sounds daily at the set time.
Go to step 5.
“
Weekly
”
Alarm sounds weekly at the set time(s).
4
Proceed with the operation according to
your selection in step 3.
n
Once:
Enter the desired month and date.
a
M
OK
N
n
Weekly:
MbN
: Select the desired day of the week
and press
M
SELECT
N
.
a
M
OK
N
5
Set the desired time.
6
*
: Select
“
AM
”
or
“
PM
”
.
a
M
OK
N
7
Enter a text memo (10 characters max.).
a
M
OK
N
8
MbN
: Select the desired alarm tone.
a
M
SELECT
N
R
If you select one of the ringers
(
“
Ringer 1
”
to
“
Ringer 5
”
), select
the desired frequency (
“
Frequency
1
”
to
“
Frequency 6
”
).
R
We recommend selecting a different
ringer tone from the one used for
outside calls and intercom calls.
9
MbN
: Select the desired snooze setting.
a
M
SAVE
N
10
M
SELECT
N
a
M
OFF
N
Note:
R
Press
M
STOP
N
to stop the alarm completely.
R
When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R
Press any dial key or
M
SNOOZE
N
to stop
the sound but keep the snooze function
activated.
R
If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
Night mode
Night mode allows you to select a period of
time during which the handset and/or base
unit will not ring for outside calls. This feature
is useful for time periods when you do not
want to be disturbed, for example, while
sleeping. Night mode can be set for each unit.
Using the phonebook’s group feature
(page 38), you can also select groups of
callers whose calls override night mode and
ring the unit (Caller ID subscribers only).
Important:
R
Make sure the unit’s date and time setting
is correct (page 21).
R
If you have set the alarm, the alarm sounds
even if the night mode is turned on.
Turning night mode on/off
1
For handset:
M
MENU
N#238
For base unit (using a handset):
M
MENU
N#*238
48
For assistance, visit www.panasonic.ca/english/support
Programming
TGM470_490C(en)_0805_ver403.pdf 48
2021/08/05 10:23:30
