R
When the base unit is running on battery power, the maximum ringer volume of the base unit
will be reduced.
R
If your phone service provider requires additional devices in order to make and receive calls,
such as a modem, you may still not be able to make and receive calls even if the base unit’s
backup power feature is functioning.
Base unit battery installation (for replacement)
Important:
R
The following AAA (R03) size batteries can be used with the base unit:
– Rechargeable Ni-MH batteries
– Standard (non-rechargeable) alkaline batteries
R
Do NOT use manganese batteries.
R
Confirm correct polarities (
,
).
*1 The base unit can fully charge Ni-MH batteries in about 15 hours.
*2 If the rechargeable batteries become depleted during a power failure, you can insert alkaline
batteries into the base unit. Remove the alkaline batteries when power is restored.
1
Disconnect the telephone line cord (
A
).
2
Open the battery cover (
B
).
3
Install the batteries in the battery compartment (
C
).
4
Close the cover (
D
), then reconnect the telephone line cord
(
E
).
A
E
C
B
D
For assistance, visit www.panasonic.ca/english/support
15
Getting Started
TGM470_490C(en)_0805_ver403.pdf 15
2021/08/05 10:23:27
