Panasonic KX-TGM460, Руководство по эксплуатации

Страница: 77 / 104

1 to perform a specific operation, or press
2 to listen to more available operations.
n When the Spanish voice guidance is
selected
To start the voice guidance, press 9 . The
voice guidance announces the available
remote commands (page 77).
Note:
R If you do not press any dial keys within 10
seconds after a voice guidance prompt, the
unit disconnects your call.
Remote commands
You can press dial keys to access certain
answering system functions without waiting for
the voice guidance to prompt you.
Key Operation
1 Repeat message (during
playback)
*1
2 Skip message (during playback)
4 Play new messages
5 Play all messages
9
Stop playback *2
Start voice guidance
*3
0 Turn answering system off
*4 Erase currently playing message
*5 Erase all messages
*# End remote operation
(or hang up)
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
*2 For English voice guidance only
*3 For Spanish voice guidance only
Turning on the answering
system remotely
1
Dial your phone number from a
touch-tone phone.
2
Let the phone ring 15 times.
R A long beep is heard.
3
Enter your remote access code within 10
seconds after the long beep.
R The greeting message is played back.
R You can either hang up, or enter your
remote access code again and begin
remote operation (page 76).
Answering system
settings
Call screening
While a caller is leaving a message, you can
listen to the call through the unit’s speaker.
To adjust the speaker volume, press
MjN or
MkN repeatedly.
You can answer the call by pressing M TALK N
on the handset or MZN on the base unit.
Call screening can be set for each unit. The
default setting is
“
On
” .
1
For handset: M MENU N#310
For base unit (using a handset):
M MENU N#*310
2
MbN : Select the desired setting. a
M SAVE N a M OFF N
Number of rings before the
unit answers a call
You can change the number of times the
phone rings
“
Ring count
” before the unit
answers calls. You can select 2 to 7 rings, or
“
Toll saver
” .
The default setting is “ 4 rings ” .
“
Toll saver
” : The unit’s answering system
answers at the end of the 2nd ring when new
messages have been recorded, or at the end
of the 5th ring when there are no new
messages. If you call your phone from outside
to listen to new messages (page 76), you
know that there are no new messages when
the phone rings for the 3rd time. You can then
hang up without being charged for the call.
1
M MENU N#211
2
MbN : Select the desired setting. a
M SAVE N a M OFF N
For assistance, please visit http://shop.panasonic.com/support 77
Answering System for Landline