Panasonic KX-TGM430, Руководство по эксплуатации

Страница: 61 / 112

stop the snooze function before making the
call.
Silent mode
Silent mode allows you to select a period of
time during which the handset and/or base
unit will not ring for outside calls. This feature
is useful for time periods when you do not
want to be disturbed, for example, while
sleeping. Silent mode can be set for each unit.
Using the phonebook’s group feature
(page 48), you can also select groups of
callers whose calls override silent mode and
ring the unit (Caller ID subscribers only).
Important:
R Make sure the unit’s date and time setting
is correct (page 24).
R If you have set the alarm, the alarm sounds
even if the silent mode is turned on.
Turning silent mode on/off
1
For handset: M MENU N#238
For base unit (using a handset):
M MENU N#*238
2
MbN : Select the desired setting. a
M SAVE N
R If you select “
Off
” , press M OFF N to
exit.
3
Enter the desired hour and minute you
wish to start this feature.
4
* : Select “
AM
” or “
PM
” . a M OK N
5
Enter the desired hour and minute you
wish to end this feature.
6
* : Select “ AM ” or “ PM ” .
7
M SAVE N a M OFF N
Changing the start and end time
1
For handset: M MENU N#237
For base unit (using a handset):
M MENU N#*237
2
Continue from step 3, “Turning silent
mode on/off”, page 61.
Selecting groups to bypass silent
mode
1
For handset: M MENU N#241
For base unit (using a handset):
M MENU N#*241
2
MbN : Select the desired groups. a
M SELECT N
R “ ” is displayed next to the selected
group numbers.
R To cancel the selected group:
MbN : Select the group. a Press
M SELECT N again. “ ” disappears.
3
M SAVE N a M OFF N
Other programming
Changing the handset
name
The default handset name is “
Handset 1
” to
“
Handset 6
” . You can customize the name
of each handset (“Bob”, “Kitchen”, etc.). This is
useful when you make intercom calls between
handsets. To display the handset name in
standby mode, turn on the handset name
display feature (page 61).
1
M MENU N#104
2
Enter the desired name (10 characters
max.).
a M SAVE N a M OFF N
Displaying the handset
name
You can select whether or not the handset
name is displayed in standby mode. The
default setting is
“
Off
” .
1
M MENU N#105
2
MbN : Select the desired setting. a
M SAVE N a M OFF N
For assistance, please visit http://shop.panasonic.com/support 61
Programming
TGM43x(en)_0426_ver031.pdf 61 2016/04/26 10:55:19