–
“
Voice mail msg. via phone co.
”
is displayed if message indication service is
available.
1
M
MENU
N
(right soft key)
a
a
M
SELECT
N
R
The speakerphone turns on.
2
Follow the pre-recorded instructions.
3
When finished, press
M
OFF
N
.
Note:
R
You can also use the
M
ACCESS
N
soft key,
if displayed, to play new voice mail
messages.
R
If the handset still indicates there are new
messages even after you have listened to
all new messages, turn it off by pressing
and holding
#
until the handset beeps.
Using the Smart function key
When
“
Voice mail msg. via phone
co.
”
is displayed and the
indicator
flashes slowly, there are new voice mail
messages.
Press
M
N
in step 1 on “Listening to voice
R
“
New VM
”
must be set to “On” in “Setting
the Smart function key”, page 15.
R
If the voice mail (VM) access number is not
stored, the
indicator does not flash.
R
When the unit has new messages, new
voice mail messages, and missed calls, the
unit can be operated to play the new
messages first, play the new voice mail
messages next, and then show the missed
calls.
Wall mounting (Charger
only)
Note:
R
Make sure that the wall and the fixing
method are strong enough to support the
weight of the unit.
Drive the screws (
1
) (not supplied) into the
wall.
2
27.2 mm (1
1
/
16
inches)
1
2
For assistance, please visit http://www.panasonic.com/help
59
Useful Information
TGH26x(en)_1217_ver051.pdf 59
TGH26x(en)_1217_ver051.pdf 59
2013/12/17 18:31:50
2013/12/17 18:31:50