2
MbN
:
“
Hold
”
a
M
SELECT
N
3
To answer the 2nd call:
Press
M
CELL
N
while the 2nd call is being
received.
4
To hang up the 2nd call and return to the
1st call (landline call), press
M
OFF
N
, then
press
M
N
.
Answering a 2nd call during a cellular
call
1
Press
M
MENU
N
during a cellular call.
2
MbN
:
“
Hold
”
a
M
SELECT
N
3
To answer the 2nd call:
Press
M
N
or
M
CELL
N
while the 2nd call
is being received.
4
To hang up the 2nd call and return to the
1st call (cellular call), press
M
OFF
N
, then
press
M
CELL
N
.
*1 If you press
M
CELL
N
and the selection list
is displayed, select the desired cellular
line and press
M
SELECT
N
.
Intercom
Intercom calls can be made between
handsets.
Note:
R
When paging unit(s), the paged unit(s)
beeps for 1 minute.
R
If you receive an outside call while talking
on the intercom, the interrupt tone sounds
(page 35).
To answer the call with the handset, press
M
OFF
N
, then press the corresponding line
key.
Making an intercom call
1
M
MENU
N
(right soft key)
a
a
M
SELECT
N
2
MbN
: Select the desired unit.
a
M
SELECT
N
3
When you finish talking, press
M
OFF
N
.
Note:
R
You can also use the
M
INTERCOM
N
soft
key, if displayed, to make intercom calls.
Answering an intercom call
1
Press
M
N
to answer the page.
2
When you finish talking, press
M
OFF
N
.
Using the Smart function key
Press
M
N
to answer the page.
Power back-up operation
for landline
When a power failure occurs, the charged
handset temporarily supplies power to the
base unit (power back-up mode). This allows
you to make and receive landline calls using a
handset during a power failure. The base unit
will not perform any other functions. However,
some functions such as Caller ID and
phonebook are available only when using a
handset other than the handset supplying
power to the base unit. You can program
“
Power failure
”
and the default setting is
“
Auto
”
(page 37).
Important:
R
If a handset is not placed on the base unit
when a power failure occurs,
“
Base no
power Press OFF
”
is displayed. After
pressing
M
OFF
N
on the handset, place it on
the base unit to start power back-up mode.
R
Power back-up mode will not work if the
battery level of the power supplying
handset is or .
R
Do not lift the power supplying handset
from the base unit during power back-up
mode.
24
For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls
TGH26x(en)_1217_ver051.pdf 24
TGH26x(en)_1217_ver051.pdf 24
2013/12/17 18:31:48
2013/12/17 18:31:48
