Panasonic KX-TGH262C, Руководство по эксплуатации

Страница: 20 / 72

2
MbN : Select the desired entry.
3
M N
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 28).
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
1
9 a MDN (Pause)
2
Dial the phone number. a M N
Note:
R A 3.5 second pause is inserted each time
MDN (Pause) is pressed.
Answering calls
1
Lift the handset and press M N or MZN
when the unit rings.
R To answer a cellular call, you can also
press
M CELL N .
2
When you finish talking, press M OFF N or
place the handset on the base unit or
charger.
Any key answer: You can answer the call by
pressing any dial key.
Auto talk: You can answer calls simply by
lifting the handset (page 36).
Temporary handset ringer off: You can turn
the ringer off temporarily by pressing M N .
Using the Smart function key
When the indicator flashes rapidly, press
M N .
R You can answer the call even if the handset
is placed on the base unit or charger
(page 14).
You can finish talking by pressing
M OFF N
without lifting up the handset.
Adjusting the ringer volume
Handset
Press MDN or MCN repeatedly to select the
desired volume while ringing.
Base unit
Press MjN or MkN repeatedly to select the
desired volume while ringing.
R To turn the ringer off, press and hold MkN
until the unit beeps.
Useful features during a
call
Hold
1
Press M MENU N during an outside call.
2
MbN : “
Hold
” a M SELECT N
3
To release hold on the cellular line:
Press M CELL N .
*1
R Another handset user can take the call
by pressing
M CELL N .
*1
*1 If you press M CELL N and the
selection list is displayed, select
the desired cellular line and press
M SELECT N .
To release hold on the landline:
Press M N .
R Another handset user can take the call
by pressing
M N .
Note:
R After holding for 10 minutes, the call is
disconnected.
Mute
1
Press M MUTE N during a call.
2
To return to the call, press M MUTE N .
Note:
R M MUTE N is a soft key visible on the display
during a call.
20
Making/Answering Calls
TGH26xC(en)_1224_ver013.pdf 20 2013/12/24 14:29:38