Panasonic KX-TGH260BX, Руководство по эксплуатации

Страница: 50 / 72

Using a Bluetooth wireless
headset (optional) for
landline calls
By pairing a Bluetooth headset to the base
unit, you can have a hands-free conversation
wirelessly for landline calls.
Important:
R Your Bluetooth wireless headset must
support the HeadSet Profile (HSP)
specification.
R 1 headset can be paired to the base unit.
R Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
mobile lines, or the headset and 1 mobile
line).
R For best performance, we recommend
using a Bluetooth headset within 1 m of the
base unit. A headset can communicate with
the base unit within a range of
approximately 10 m.
Pairing a headset to the base unit
Important:
R Make sure that the Bluetooth headset is not
connected to any other Bluetooth device.
1
Your headset:
Set your headset to pairing mode.
R Refer to the headset operating
instructions.
2
Handset:
M N (right soft key) #621
3
If your headset PIN is “
0000
”, go to
step 4.
If your headset PIN is other than
“
0000
”, press M C N , then enter your
headset PIN.
R Typically, default PIN is “ 0000 ” . Refer
to the headset operating instructions.
4
Press M OK N , then wait until a long beep
sounds.
5
M N
R When the indicator on the base unit
lights up, you are ready to use the
headset.
Connecting/disconnecting a headset
If you cannot connect the headset and base
unit using the headset, you can connect using
the handset.
To use your headset with another Bluetooth
device such as a mobile phone, you may need
to disconnect it from the base unit.
Important:
R Make sure that the headset is turned on.
1
To connect/disconnect:
M N (right soft key) #622
R A long beep sounds.
2
M N
Unpairing a headset
You can cancel a pairing of the headset that is
stored to the base unit.
1
M N (right soft key) #612
2
MbN : “
Yes
” a M OK N
R When the headset is unpaired, the
indicator is turned off.
3
M N
Operating a Bluetooth wireless
headset using a landline
Important:
R Refer to your headset operating instructions
for headset operations.
Answering landline calls with your
headset
To answer a landline call, turn on your
headset referring to your headset operating
instructions.
When you finish talking, turn off your headset
referring to your headset operating
instructions.
Note:
R If you cannot hang up the call using your
headset, press
M N on the base unit.
50
Using Bluetooth Devices
TGH260BX_UE(en)_0806_ver021.pdf 50 2014/08/06 15:12:50