Panasonic KX-TGH222C, Руководство по эксплуатации

Страница: 31 / 56

4
MbN : “
Call block
” a M SELECT N
5
MbN : “ Yes ” a M SELECT N
6
Edit the phone number if necessary (24
digits max.).
7
M SAVE N a M OFF N
n By entering phone numbers:
1
M MENU N (right soft key) #217
2
MbN : “
Block a single number
” a
M SELECT N
3
M MENU N a MbN : “
Add
” a M SELECT N
4
Enter the phone number (24 digits max.).
R To erase a digit, press M CLEAR N .
5
M SAVE N a M OFF N
Storing a range of numbers
1
M MENU N (right soft key) #217
2
MbN : “ Block range of numbers ” a
M SELECT N
3
M MENU N a MbN : “ Add ” a M SELECT N
4
Enter the desired number (2-8 digits).
R To erase a digit, press M CLEAR N .
5
M SAVE N a M OFF N
Blocking incoming calls that
have no phone number
You can reject calls when no phone number is
provided, such as private callers or out of area
calls.
1
M MENU N (right soft key) #240
2
MbN : Select the desired setting. a
M SAVE N a M OFF N
Setting the first ring for the call
block list
If you do not want the first ring from a number
on the call block list to sound, turn the first ring
setting to
“ Off ” . The default setting is “ On ” .
1
M MENU N (right soft key) #173
2
MbN : Select the desired setting. a
M SAVE N a M OFF N
Viewing/editing/erasing call
block numbers
1
M MENU N (right soft key) #217
2
MbN : “
Block a single number
” or
“
Block range of numbers
” a
M SELECT N
3
MbN : Select the desired entry.
R To exit, press M OFF N .
4
To edit a number:
M EDIT N a Edit the number. a M SAVE N
a M OFF N
To erase a number:
M ERASE N a MbN : “
Yes
” a M SELECT N
a M OFF N
Note:
R When editing, press the desired dial key to
add,
M CLEAR N to erase.
Erasing all call block numbers
1
M MENU N (right soft key) #217
2
MbN : “
Block a single number
” or
“
Block range of numbers
” a
M SELECT N
3
M MENU N a MbN : “
Erase all
” a
M SELECT N
4
MbN : “
Yes
” a M SELECT N
5
MbN : “
Yes
” a M SELECT N a M OFF N
Other programming
Changing the handset name
The default handset name is “ Handset 1 ” to
“
Handset 6
” . You can customize the name
of each handset (“Bob”, “Kitchen”, etc.). This is
useful when you make intercom calls between
handsets. To display the handset name in
standby mode, turn on the handset name
display feature (page 32).
1
M MENU N (right soft key) #104
2
Enter the desired name (10 characters
max.).
31
Programming
TGH21xC(en)_0715_ver110.pdf 31 2014/07/15 15:51:30