R
Make sure that the wall and the fixing method are strong enough to support the
weight of the unit.
Battery installation/Battery charging
Important:
R
Use the supplied rechargeable batteries. For replacement, we recommend using
the Panasonic rechargeable batteries noted on page 2.
R
USE ONLY rechargeable Ni-MH batteries AAA (R03) size (
1
).
R
Do NOT use alkaline/manganese/Ni-Cd batteries.
R
Confirm correct polarities (
,
).
Charge for about 7 hours.
R
Confirm
“
Charging
”
is displayed (
2
).
R
When the batteries are fully charged,
“
Fully charged
”
is displayed.
1
2
Note:
R
If the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends (
,
) and the charge contacts with a dry cloth and
charge again.
Registering a handset to a base unit
1
Base unit:
Press and hold
M
LOCATOR
N
for about 5 seconds.
R
If all registered handsets start ringing, press
M
LOCATOR
N
again to stop,
then repeat this step.
2
Handset:
Place the handset on the base unit or charger, then wait until a long beep
sounds and
is displayed.
Note:
R
If an error tone sounds, or if
is displayed, register the handset according to
the base unit’s operating instructions.
For assistance, please visit http://shop.panasonic.com/support
3
Installation
TGFA30US(en)_0210_ver102.pdf 3
2017/02/10 19:12:03
