Panasonic KX-TGF973, Руководство по эксплуатации

Страница: 63 / 116

Note:
R Press M STOP N to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R Press any dial key or M SNOOZE N to stop
the sound but keep the snooze function
activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
Silent mode
Silent mode allows you to select a period of
time during which the handset and/or base
unit will not ring for outside calls. This feature
is useful for time periods when you do not
want to be disturbed, for example, while
sleeping. Silent mode can be set for each unit.
Using the phonebook’s group feature
(page 48), you can also select groups of
callers whose calls override silent mode and
ring the unit (Caller ID subscribers only).
Important:
R Make sure the unit’s date and time setting
is correct (page 18).
R If you have set the alarm, the alarm sounds
even if the silent mode is turned on.
Turning silent mode on/off
Handset
1
M MENU N#238
2
MbN : Select the desired setting. a
M SAVE N
R If you select “
Off
” , press M OFF N to
exit.
3
Enter the desired hour and minute you
wish to start this feature.
4
* : Select “
AM
” or “
PM
” . a M OK N
5
Enter the desired hour and minute you
wish to end this feature.
6
* : Select “
AM
” or “
PM
” .
7
M SAVE N a M OFF N
Base unit
1
M MENU N#238
2
MbN : Select the desired setting. a
M SAVE N
R If you select “
Off
” , press M EXIT N to
exit.
3
Enter the desired hour and minute you
wish to start this feature.
4
M AM/PM N : Select “
AM
” or “
PM
” . a M OK N
5
Enter the desired hour and minute you
wish to end this feature.
6
M AM/PM N : Select “ AM ” or “ PM ” .
7
M SAVE N a M EXIT N
Changing the start and end time
Handset / Base unit
1
M MENU N#237
2
Continue from step 3 for handset or step
3 for base unit, “Turning silent mode on/
off”, page 63.
Selecting groups to bypass silent
mode
Handset / Base unit
1
M MENU N#241
2
MbN : Select the desired groups. a
M SELECT N
R “ ” is displayed next to the selected
group numbers.
R To cancel the selected group:
MbN : Select the group. a Press
M SELECT N again. “ ” disappears.
3
M SAVE N
4
Proceed with the operation for your unit.
Handset: M OFF N
Base unit: M EXIT N
Baby monitor
This feature allows you to listen in on a room
where another handset is located, allowing
For assistance, please visit http://shop.panasonic.com/support 63
Programming
KX-TGF97xUSA(en-us)_0928_ver121.pdf 63 9/28/2022 11:24:41 AM