Note:
R
If there is no response from the caller, and
the user does not press any keys in step 2
within 10 seconds, the unit will announce
that the call will be disconnected, and
disconnects the call.
Note for handset:
R
While on the charger, the
M
TELE.BLK.
N
key
is not available. Lift the handset from the
charger to use this feature.
R
To use this feature, set the Auto talk feature
to
“
Off
”
.
One ring scam alert
The one ring scam alert feature notifies the
user when calling back a number that is
judged to be a scam call. This can help reduce
the risk of calling back expense international
numbers.
During an incoming call, if the caller
disconnects the call after 1 or 2 rings, the call
is judged to be a scam call. Depending on the
number of rings made before a call is
disconnected, a non-malicious call may also
be judged as a scam call. The default setting
is
“
1 or 2 rings
”
.
Note:
R
The call will not be judged as a scam call in
the following conditions:
– When a call is answered by pressing
M
N
on the handset or
M
SP-PHONE
N
on the base unit (page 18).
– When a call is screened by pressing
M
TELE.BLK.
N
– When a call is answered with Answer by
voice Command (page 24).
– When a call is blocked with the call block
feature (page 26).
– When automated call block is set to
“
Block
”
(page 29).
– When a call is answered by the
answering system.
To use this feature, set the ring count for
the answering system to more than the
number of rings of the one ring scam
alert (page 57).
– When a call is answered by a voicemail
service.
To use this feature, set the ring count for
the voicemail service to more than the
number of rings of the one ring scam
alert (call your service provider)
(page 58).
– When the caller’s phone number
matches an entry in the phonebook
(page 33).
– When you do not subscribe to the caller
ID service.
– When the call is disconnected before
receiving caller ID information.
R
During call waiting, the unit cannot judge
whether the 2nd caller is a scam call.
Setting the number of rings for
one ring scam
Handset / Base unit
1
M
MENU
N#798
2
MbN
: Select the desired setting.
a
M
SAVE
N
“
1 ring
”
Judge 1 ring as a scam call.
“
1 or 2 rings
”
Judge 1 or 2 rings as a scam call.
“
Off
”
Turns off the setting and does not
judge as scam calls.
Note:
R
When a phone number is judged as a scam
call,
“
”
will be displayed in the caller list
unless:
– the number is identified as Automated
call block.
– the number is stored in the call block list.
32
For assistance, please visit http://shop.panasonic.com/support
Enhanced Call Block
TGF94x(en)_1007_ver014.pdf 32
2022/10/07 15:47:31