– 8 –
Frequently asked questions
Question
Cause/solution
Why is
_
displayed?
L
The handset is too far from the base unit. Move closer.
L
The base unit’s AC adaptor is not properly connected. Reconnect AC adaptor
to the base unit.
L
The handset is not registered to the base unit. Register it.
1
Handset:
{
MENU
}
(
13
)
2
Base unit:
Press and hold
{
LOCATOR
}
for about 5 seconds.
3
Handset:
Press
{
OK
}
, then wait until a long beep sounds.
Why am I unable to pair a Bluetooth
headphone to the handset?
L
Confirm that the Bluetooth wireless headphone supports the Hands Free
Profile (HFP) specification. If your headphone do not support the HFP
specification, your headphone is not compatible to be paired with the handset.
L
Your headphone is turned off. Turn it on.
L
Make sure that the Bluetooth headphone is not connected to another
Bluetooth device.
Why am I unable to connect a
Bluetooth headphone to the handset?
L
Make sure that the Bluetooth headphone is not connected to other Bluetooth
devices.
L
The headphone is turned off or the battery is low.
Turn it on or fully charge the headphone.
L
The Bluetooth headphone is out of range.
Move closer and try again.
L
The Bluetooth headphone is in the cradle.
Lift the headphone.
How can I increase the handset
volume level?
L
Press the volume key
{^}
repeatedly while talking.
Why is the conversation noisy or
cutting off?
L
Try to relocate the base unit so that distance to the handset is minimized.
L
If the same problem occurs even if the handset is next to the base unit,
contact an authorized service centre.
Can I add another accessory handset
to my base unit?
L
Yes, you can add up to 6 handsets (including the handset(s) sold with your
base unit) to a single base unit.
Can I keep the batteries charging all
the time?
L
You can leave the handset on the charger anytime. This will not harm the
batteries.
How can I answer a call waiting call
(2nd call)?
L
Press
{
CALL WAIT
}
when you hear the call waiting tone.
TGF892C(en)_QG_mmdd_verxxx.fm Page 8 Thursday, August 3, 2023 11:31 AM