*12 This setting is available when you have the key detector (KX-TGA20). Read the installation manual
for more information on the key detector.
*13 For models with supplied key detectors, the display shows
“
1:Detector1
”
.
*14 For Detector 1.
*15 For Detector 2.
*16 For Detector 3.
*17 For Detector 4.
*18 Handset
*19 Base unit
*20 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the
handset to answer a call, turn off this feature.
*21 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if
necessary. The setting should stay at
“
700 ms
”
unless pressing
M
FLASH
N
fails to pick up the
waiting call.
*22 Generally, the line mode setting should not be changed. This setting automatically maintains receiver
volume at the proper level depending on the current telephone line condition. Set the line mode to
“
A
”
if telephone line condition is not good.
Alarm
An alarm sounds at the set time for 1 minute and
is repeated 5 times at 5 minute intervals (snooze
function). A text memo can also be displayed for
the alarm. A total of 3 separate alarm times can be
programmed for each handset. You can set one of
3 different alarm options (once, daily, or weekly)
for each alarm time.
Important:
R
Make sure the unit’s date and time setting is
correct (page 16).
Handset
1
M
MENU
N#720
2
MbN
: Select the desired alarm.
a
M
SELECT
N
3
MbN
: Select the desired alarm option.
a
M
SELECT
N
“
Off
”
Turns alarm off. Go to step 10.
“
Once
”
An alarm sounds once at the
set time.
“
Daily
”
An alarm sounds daily at the set
time. Go to step 5.
“
Weekly
”
Alarm sounds weekly at the set
time(s).
4
Proceed with the operation according to your
selection in step 3.
n
Once:
Enter the desired month and date.
a
M
OK
N
n
Weekly:
MbN
: Select the desired day of the week and
press
M
SELECT
N
.
a
M
OK
N
5
Set the desired time.
6
*
: Select
“
AM
”
or
“
PM
”
.
a
M
OK
N
7
Enter a text memo (10 characters max.).
a
M
OK
N
8
MbN
: Select the desired alarm tone.
a
M
SELECT
N
R
We recommend selecting a different ringer
tone from the one used for outside calls.
9
MbN
: Select the desired snooze setting.
a
M
SAVE
N
10
M
SELECT
N
a
M
OFF
N
Note:
R
Press
M
STOP
N
to stop the alarm completely.
R
When the handset is in use, the alarm will not
sound until the handset is in standby mode.
R
Press any dial key or
M
SNOOZE
N
to stop the
sound but keep the snooze function activated.
R
If you want to make an outside call when the
snooze function is activated, please stop the
snooze function before making the call.
For assistance, please visit http://shop.panasonic.com/support
45
Programming
KX-TGF892_(en-us)_0426_ver201.pdf 45
4/26/2022 3:14:18 PM
