Temporary tone dialing for landline
calls (for rotary/pulse service users)
Press
*
before entering access numbers which
require tone dialing.
Recording a telephone conversation
(2-way recording)
This unit can record a telephone conversations
during landline calls.
1
Press
M
RECORD
N
during a landline call.
R
The total recordable time is displayed.
R
The unit announces to both parties that the
recording will start.
R
The unit starts recording.
2
To stop recording, press
M
STOP
N
.
R
You can continue the conversation with the
outside caller.
Note:
R
When recording is completed:
– The total number of recordings will be added
to the number of messages in the answering
system.
–
M
N
on the base unit flashes.
–
“
New message
”
is displayed.
– Audible message alert sounds (page 68).
R
To listen to the recorded conversation, refer
"Listening to messages", page 67.
R
2 way recording is not available during
conference calls.
R
The recording will end in the following situations:
– When
M
FLASH
N
is pressed.
– When the hold or intercom feature is used.
R
When memory is/becomes full:
–
“
Memory full
”
is shown on the display.
– An error tone sounds.
Call share
You can join an existing outside call.
To select the line that is being used for the call:
– for a cellular line, press
M
CELL 1
N
or
M
CELL 2
N
,
then lift the corded handset.
– for the landline, lift the corded handset.
Note:
R
A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions.
(3-way conference)
R
To prevent other users from joining your
conversations with outside callers, turn call
sharing mode off (page 50).
R
A 2nd party cannot join an outside call that is
being recorded (page 28).
Transferring calls, conference calls
Outside calls can be transferred or a conference
call with an outside party can be made between a
handset and the base unit.
1
During an outside call, press
M
INTERCOM
N
.
When 2 or more handsets are registered:
MbN
: Select the desired unit.
a
M
SELECT
N
R
To page all handsets, press
0
or wait for a
few seconds.
2
Wait for the paged party to answer.
R
If paged party does not answer, press
M
INTERCOM
N
to return to the outside call.
3
To complete the transfer:
Place the corded handset on the cradle.
R
The outside call is being routed to the
handset.
To establish a conference call:
Press
M
CONF
N
.
R
To leave the conference, place the corded
handset on the cradle. The other 2 parties
can continue the conversation.
R
To put the outside call on hold, press
M
HOLD
N
. To resume the conference, press
M
CONF
N
.
Transferring a cellular call between
the base unit and a cellular phone
Transferring a cellular call from the base unit
to a cellular phone
1
Press
M
MENU
N
during a cellular call.
2
MbN
:
“
Transfer to cell
”
a
M
SELECT
N
R
The cellular call is transferred to the cellular
phone.
3
Place the corded handset on the cradle.
Note:
R
You can also press and hold
M
CELL 1
N
or
M
CELL 2
N
to transfer a cellular call instead of
R
Depending on your cellular phone type, you
may need to set the cellular phone to be ready
to talk before transferring. For example, if your
cellular phone has a top cover, open it
beforehand.
Transferring a cellular call from a cellular
phone to the base unit
During a conversation using a cellular phone,
press
M
CELL 1
N
or
M
CELL 2
N
, then lift the corded
handset.
R
The cellular call is transferred to the base unit.
28
For assistance, please visit http://shop.panasonic.com/support
Making/Answering Calls Using the Base Unit
TGF88x(en)_1104_ver033.pdf 28
2019/11/05 13:22:53
