Panasonic KX-TGF743, Руководство по эксплуатации

Страница: 24 / 76

Call block
You can press the M CALL BLOCK N button in
the following situations to disconnect the
current call and add a phone number to the
call block list:
– when an incoming call is being received
– when an incoming call is being recorded by
the answering system
– when talking on an outside call
Once a phone number has been added to the
call block list, the unit will block calls from that
phone number in the future.
Handset / Base unit
1
Press M CALL BLOCK N under the
situations shown above.
2
Confirm the call block number and press
M YES N .
R The call block number is stored in the
call block list, confirmation tone
sounds
*1 and “
Call blocked
” is
displayed, then the call is disconnected.
*1 Confirmation tones are used with
permission of © 2018 Copyrights
Vision Inc.
Note:
R If the call has no phone number, the call is
blocked but it is not stored in the call block
list.
R The call block feature is not available for
intercom calls or calls received by call
waiting.
R Blocked calls are logged in the caller list.
Storing unwanted callers
The unit can block calls by storing the desired
items in the call block list beforehand (Caller
ID subscribers only).
–
“ Block a single number ”
*1
/ “ Block
a single #
” *2 : The unit blocks calls from
specific phone numbers stored in the call
block list.
– “ Block range of numbers ”
*1
/ “ Block
range of #
” *2 : The unit blocks calls that
begin with a number stored in the call block
list, such as a toll-free phone number prefix
or certain area codes.
– “ Block unknown CID ”
*1
/ “ Block
unknown
” *2 : The unit blocks calls that
have no phone number.
*1 Handset
*2 Base unit
Single phone numbers and ranges of numbers
can be stored in the call block list up to 1,000
items in total.
Blocking unwanted callers:
When a call is received, the unit rings once *1
while caller information is being received.
If the caller’s phone number matches an entry
in the call block list, the unit emits no sound to
the caller, and disconnects the call.
*1 If you do not want this one ring to sound,
select “
No
” in “Turning the first ring on/
off” (page 25).
Storing a single phone number
Important:
R We recommend storing 10 digits (including
the area code). If only 7 digits are stored, all
numbers that have the same last 7 digits
will be blocked.
Adding call blocked numbers from
the caller list
Handset
1
MCN CID
2
MbN : Select the desired entry to be
blocked.
R To edit the number: M MENU N a MbN :
“
Edit
” a M SELECT N
Press M EDIT N repeatedly until the
phone number is shown in the 10-digit
format.
a M SAVE N a MbN : “
Call
block
” a M SELECT N a Go to step
4.
3
M CALL BLOCK N
4
MbN : “
Yes
” a M SELECT N
5
Edit the phone number if necessary (24
digits max.).
a M SAVE N a M OFF N
24 For assistance, please visit http://shop.panasonic.com/support
Call Block
TGF74xUSA_OI_0416_ver211.pdf 24 2020/04/16 8:51:25