Voicemail service for
landline
For Australia
Voicemail is an automatic answering service
offered by your phone service provider.
For New Zealand
To receive Call Minder or Message Mailbox
messages, please note the following:
“Call Minder” and “Message Mailbox” are
automatic answering services offered by your
phone service provider.
For Australia and New Zealand
After you subscribe to this service, your phone
service provider’s voicemail system answers calls
for you when you are unavailable to answer the
phone or when your line is busy. Messages are
recorded by your phone service provider, not your
telephone.
Please contact your phone service provider for
details of this service.
Important:
R
To use the voicemail service provided by your
phone service provider rather than the unit’s
answering system, turn off the answering
system (page 58). For details, see page 64.
Storing the voicemail (VM) access
number
In order to listen to your voicemail messages, you
must dial your phone service provider’s voicemail
access number. Once you have stored your
voicemail access number, you can dial it
automatically (page 65).
You can configure this setting using either the
base unit or one of the handsets.
Handset / Base unit
1
M
MENU
N#331
2
Enter your access number (24 digits max.).
a
M
SAVE
N
3
Proceed with the operation for your unit.
Handset:
M
OFF
N
Base unit:
M
EXIT
N
Note:
R
When storing your voicemail access number
and your mailbox password, press
MDN
(Pause)
on the handset or
M
PAUSE
N
on the base unit to
add pauses (page 20, 25) between the access
number and the password as necessary.
Contact your phone service provider for the
required pause time.
Example:
083210
VM access
number
Pauses
Password
PPPP
8888
To erase the voicemail access number
Handset / Base unit
1
M
MENU
N#331
2
Press and hold
M
CLEAR
N
until all digits are
erased.
a
M
SAVE
N
3
Proceed with the operation for your unit.
Handset:
M
OFF
N
Base unit:
M
EXIT
N
Listening to voicemail messages
When new messages have been recorded,
“
Voice mail msg. via phone co.
”
is
displayed if message indication service is available.
Handset / Base unit
1
M
MENU
N#330
R
The speakerphone turns on.
R
Lift the corded handset if needed.
2
Follow the pre-recorded instructions.
3
When finished, hang up.
Note:
R
You can also use the
M
ACCESS
N
soft key, if
displayed, to play new voicemail messages.
R
If the handset and base unit still indicate there
are new messages even after you have listened
to all new messages, turn it off by pressing and
holding
#
until the handset or base unit beeps.
65
Useful Information
TGF38xAZ(en)_0319_ver001.pdf 65
2015/03/19 21:57:18