Sub-menu 1
Sub-menu 2
Settings
Code
Unit
Repeater mode
–
On
<
Off
>
#138
/
Registration
Register handset
–
#130
Deregistration
–
#131
Deregistration
–
–
#131
Country
–
<
Australia
>
New Zealand
#136
/
Battery saving
mode
–
On
<
Off
>
#150
Main menu: “
Baby monitor
”
Sub-menu 1
Sub-menu 2
Settings
Code
Unit
On/Off
–
On
<
Off
>
#268
Sensitivity level
–
Low
<Middle>
High
#269
Main menu: “
Key finder
”
Sub-menu 1
Sub-menu 2
Settings
Code
Unit
Search
–
–
#655
–
Battery check
–
–
*1 If you program these settings using one of the units, you do not need to program the same item using
another unit.
*2 This menu is not displayed when scrolling through the display menus. It is only available in direct
command code.
*3 When the mobile line only mode is turned on, these menus are not displayed (page 18).
*4 After the Bluetooth device is paired, the device name is displayed.
*5 For MOBILE 1
*6 For MOBILE 2
*7 The preset melodies in this product (
“
Tone 3
”
-
“
Melody 10
”
) are used with permission of © 2009
Copyrights Vision Inc.
*8 The preset melodies in this product (
“
Tone 1
”
and
“
Tone 2
”
) are used with permission of © 2013
Copyrights Vision Inc.
*9 This feature allows the unit to automatically adjust the date and time each time caller information
including date and time is received.
To turn this feature on, select
“
Caller ID auto
”
. To turn this feature off, select
“
Manual
”
. (Caller
ID subscribers only)
To use this feature, set the date and time first (page 15).
*10 This tone lets you know when you receive an outside call while you are on another line or an
intercom call. If you select
“
On
”
, the tone sounds 2 times.
*11 This setting is available when you have the key finder (KX-TGA20AZ). Read the installation manual
for more information on the key finder.
*12 For models with supplied key finders, the display shows
“
1:Finder1
”
.
*13 If you register 2 or more key finders.
*14 Handset
*15 Base unit
43
Programming
TGF38xAZ(en)_0319_ver001.pdf 43
2015/03/19 21:57:16
