Panasonic KX-TGF370 Series страница 59 Скачать руководство пользователя

Страница: 59 / 88

–

Android phone:

Bluetooth must be

turned on.

–

Android phone:

[Application Alerts

manager]

must be turned on.

–

Handset or base unit:

“

Alert On/

Off

”

must be turned on (page 59).

If this feature does not work, turn on your
device’s Bluetooth feature, unplug the base
unit’s AC adaptor, and then reconnect it.

Turning on

[Application Alerts

manager]

Use the following procedure after
installing the Link to Cell app.
Android 2.x: Open your device’s

[Settings]

app.

Tap

[Accessibility]

Turn on the

[Accessibility]

and

[Application Alerts manager]

checkboxes.
Android 4.x: Open your device’s

[Settings]

app.

Tap

[Accessibility]

Turn on

[Application Alerts

manager]

Requirements

An Android device (Android 2.1 or later)

Text message (SMS) alert

For iPhone and BlackBerry

users

This feature alerts you on your DECT phone
when your paired cellular phone receives SMS
messages. The Link to Cell app is not required
for

iPhone and BlackBerry users

Important:

Your cellular phone must support MAP
(Message Access Profile) specification.

For further information, refer to the
instructions on web page listed below:
www.panasonic.net/pcc/support/tel/sms/

To use this feature, the following settings
are required:
–

iPhone and BlackBerry Phone:

Bluetooth must be turned on.

–

Handset or base unit:

“

Alert On/

Off

”

must be turned on (page 59).

If this feature does not work, turn on your
device’s Bluetooth feature, unplug the base
unit’s AC adaptor, and then reconnect it.

Alert settings for your

DECT phone

If your cellular phone is paired to the base unit
and receives notifications, the handset and/or
base unit can alert you:
– by briefly displaying a message
– by announcement
– by sounding alert tones

Important:

For Android users: Use the Link to Cell app
to enable the desired alerts (page 58).

Turning alert on/off

Once this feature is turned on, it will alert you
on the handset and base unit when your
cellular phone receives notifications.
–

“

”

(default): The handset and/or base

unit alert you.

–

“

Off

”

: The handset and/or base unit do

not alert you.

You can configure this setting using either the
base unit or one of the handsets.

Handset / Base unit

For CELL 1:

MENU

N#6101

For CELL 2:

MENU

N#6102

MbN

: Select the desired setting.

SAVE

Proceed with the operation for your unit.

Handset:

OFF

Base unit:

EXIT

Note:

In step 1, you can also enter the

“

Alert

settings

”

menu by pressing and holding

APP ALERTS

on the base unit.

Setting the voice alert

You can turn on/off the voice alert.
–

“

”

(default): The handset and/or base

unit notify you by voice announcement.

For assistance, visit www.panasonic.ca/english/support

Using Bluetooth® Devices

TG175CSK(en)_0324_ver011.pdf 59

2016/03/24 9:06:21

Содержание KX-TGF370 Series

























































































Результаты поиска

Содержание KX-TGF370 Series

Отзывы:

Похожие инструкции для KX-TGF370 Series

Бренды по названию

Популярные бренды

Panasonic KX-TGF370 Series, Руководство по эксплуатации

Результаты поиска

Содержание KX-TGF370 Series

Отзывы:

Похожие инструкции для KX-TGF370 Series

Бренды по названию

Популярные бренды