Other settings
Eco mode setting
Handset
You can select the desired eco mode setting by
pressing
M
ECO
N
.
The following settings are available for eco mode.
–
“
Eco
”
: Reduces the base unit transmission
power by up to 90 % in standby mode.
When this setting is selected,
is displayed.
–
“
Eco Off
”
(default setting): Turns off eco
mode.
When this setting is selected,
is not
displayed.
*1
Handset:
is displayed instead of .
Note:
R
When there is another cordless phone in use
nearby, the base unit transmission power may
not be reduced.
R
When eco mode is active, the range of the base
unit is reduced in standby mode.
R
If you set repeater mode to
“
On
”
(page 37):
– Eco mode is disabled.
–
“
Eco Mode
”
is not displayed in the display
menu (page 30).
Dialling mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is
“
Tone
”
.
“
Tone
”
: For tone dial service.
“
Pulse
”
: For rotary/pulse dial service.
You can configure this setting using either the
base unit or the handset.
Handset / Base unit
1
M
N#120
2
MbN
: Select the desired setting.
a
M
OK
N
3
Proceed with the operation for your unit.
Handset:
M
N
Base unit:
M
N
15
Getting Started
KX-TGF310_320CX(en)_0429_OI.pdf 15
4/29/2015 4:08:39 PM