Panasonic KX-TGE663, Руководство по эксплуатации

Страница: 39 / 108

2
MbN : Select the desired entry. a
M SELECT N
3
M SAVE N
4
MbN : “ Allow name ” a M SELECT N
n When a cellular phone is not paired:
1
MCN CID
2
MbN : Select the desired entry. a
M MENU N
3
MbN : “
Save allow name
” a
M SELECT N
Viewing/erasing allow name list
1
M MENU N#794
2
MbN : Select the desired entry.
R After viewing, press M OFF N to exit.
3
M ERASE N a MbN : “
Yes
” a M SELECT N
a M OFF N
Erasing all allow name list
1
M MENU N#794
2
M ERASE N a MbN : “ Yes ” a M SELECT N
3
MbN : “
Yes
” a M SELECT N a M OFF N
Displaying and clearing
blocked call counts
Total number of blocked calls (up to 65,000)
will be displayed.
1
M MENU N#790
R To exit, press M OFF N .
2
M CLEAR N
3
MbN : “ Yes ” a M SELECT N a M OFF N
Changing the access code
If the unit answers the undesirable calls such
robocall even though the automated callers
block function is on, change the access code
(3 digits max.). The default setting is
“ 1 ” .
1
M MENU N#789
2
M CLEAR N
3
Enter the new access code. a M SAVE N
a M OFF N
Automated callers block
greeting message
When the unit answers a call, a greeting
message is played to callers.
You can use either:
– your own automated callers block greeting
message
– an automated callers block pre-recorded
greeting message
Recording automated callers
block greeting message
Important:
R Make sure that you recorded the access
code in the greeting message.
1
M MENU N#791
2
M OK N a Check your access code.
3
After a beep sounds, hold the handset
about 20 cm (8 inches) away and speak
clearly into the microphone (2 minutes
max.).
4
Press M STOP N to stop recording.
5
The unit will play the recorded automated
callers block greeting message.
a
M YES N a M OFF N
Resetting to automated callers
block pre-recorded greeting
message
This procedure will erase your automated
callers block greeting message and use the
pre-recorded one.
1
M MENU N#793
2
M YES N a M OFF N
For assistance, please visit http://shop.panasonic.com/support 39
Automated callers block