background image

Limited Warranty Limits and Exclusions

(As examples, this excludes damages for lost time, travel to and from the servicer, 
loss of or damage to media or images, data or other memory or recorded content. 
The items listed are not exclusive, but for illustration only.)

This warranty ONLY COVERS failures due to defects in materials or workmanship, 
and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty 
ALSO DOES NOT COVER damages which occurred in shipment, or failures which 
are caused by products not supplied by the warrantor, or failures which result from 
accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty 
installation, set-up adjustments, misadjustment of consumer controls, improper 
maintenance, power line surge, lightning damage, modification, introduction of sand, 
humidity or liquids, commercial use such as hotel, office, restaurant, or other business 
or rental use of the product, or service by anyone other than a Factory Service Center 
or other Authorized Servicer, or damage that is attributable to acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER 

“LIMITED WARRANTY COVERAGE”.

THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL 

DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT 

OF ANY BREACH OF THIS WARRANTY.

ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF 

MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.

PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, 

ARE YOUR RESPONSIBILITY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, 
or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary 
from state to state. If a problem with this product develops during or after the warranty period, 
you may contact your dealer or Service Center. If the problem is not handled to your 
satisfaction, then write to:
 

                        Consumer Affairs Department

 

                        Panasonic Corporation of North America

 

                        661 Independence Pkwy 

                                          Chesapeake, VA 23320

As of June 2015

102

For assistance, please visit http://shop.panasonic.com/support

Appendix

TGE66xUSA(en)_1129_ver034.pdf   102

29/11/2017   3:09:17 PM

Содержание KX-TGE662













































































































Отзывы: