Setting the key lock mode
1
M
N#246
2
MbN
: Select the desired setting.
a
M
OK
N
a
M
N
Turning the key lock on/off
n
Without a password:
To turn the key lock on
Press
#
for about 2 seconds during
standby mode.
To turn the key lock off
Press
M
N
for about 2 seconds.
n
With a password:
To turn the key lock on
1
Press
#
for about 2 seconds during
standby mode.
2
Enter your key lock password (4 digits
max.).
a
M
OK
N
2 times
To turn the key lock off
1
Press
M
N
for about 2 seconds
during standby mode.
2
Enter your key lock password.
a
M
OK
N
2 times
Note:
R
You can turn off the handset while the key
lock is on. Depending on the settings, the
state of the handset may change when you
turn on the handset again:
– Without a password: The key lock turns
off.
– With a password: The key lock stays on.
R
The following keys and operations are
available when the key lock is on:
–
M
N
to stop the alarm.
– Without a password: During a call, all
available features can be used as usual.
When the call ends, the handset turns
the key lock on again.
R
When the key lock mode is set to
“
with
Password
”
:
– Dial keypad and
MTN
cannot be used
during a call.
–
M
N
(right soft key) is not available
during chain dial (page 21).
Power backup operation
When a power failure occurs, the charged
handset temporarily supplies power to the
base unit (power backup mode). This allows
you to make and receive calls using a handset
during a power failure. The base unit will not
perform any other functions. You can program
“
Power Failure
”
and the default setting is
“
Auto
”
(page 26).
Important:
R
If a handset is not placed on the base unit
when a power failure occurs,
“
Base no
power Press
”
is displayed. After
pressing
M
N
on the handset, place it on
the base unit to start power backup mode.
R
Power backup mode will not work if the
battery level of the power supplying
handset is
/
.
R
Do not lift the power supplying handset
from the base unit during power backup
mode.
Ni-MH battery performance (supplied
batteries) during power backup mode
When the batteries are fully charged,
operating time of the handset in power backup
mode varies depending on usage.
– Continuous use of the handset in power
backup mode: 2 hours max.
– Not in use in power backup mode: 3 hours
max.
Making calls during a power
failure
1
Lift the handset and dial the phone
number.
2
Within 1 minute, place the handset on the
base unit.
R
Wait until speakerphone is turned on
automatically and the call is made.
3
When the other party answers the call,
keep the handset on the base unit and
talk using the speakerphone.
4
When you finish talking, press
M
N
.
16
Making/Answering Calls
TGE610HK(en_en)_0817_ver022.pdf 16
2018/08/23 12:37:45
