– 5 –
Connecting/disconnecting the cellular phone (Handset)
Auto connection to the Bluetooth devices (cellular phones)
The unit connects to the Bluetooth devices at regular intervals if the connection is lost. To change
the interval (default:
“
1 min
”
), see the operating instructions.
L
When 3 Bluetooth devices (2 cellular phones and 1 headset) are paired to the base unit, only
2 Bluetooth devices can be used with the unit at the same time, and the base unit loses its
connection from other Bluetooth devices. To automatically resume the connection to Bluetooth
devices, leave the auto connection on.
Connecting/disconnecting the cellular phone manually
If you will not be using the paired cellular phone’s link to cell feature temporarily (for example, you
do not want the unit to ring when your cellular line receives a call), you can disconnect your
cellular phone from the base unit. If you want to use it again, reconnect the cellular phone to the
base unit.
L
After you disconnect a paired cellular phone from the base unit manually, it will automatically
be connected to the base unit in 30 minutes. If you do not use the link to cell feature anymore,
unpair the cellular phone.
L
A disconnected cellular phone is not unpaired from the base unit, so pairing it to the base unit
again is unnecessary.
1
To connect/disconnect:
For CELL 1:
{
MENU
}
(
6251
For CELL 2:
{
MENU
}
(
6252
L
A long beep sounds.
2
{
OFF
}
Cellular line only mode (If you do not use the landline) (Handset)
If you do not use the landline, we recommend setting the unit to the cellular line only mode. The
default setting is
“
Off
”
.
L
If you turn on the
“
Cell line only mode
”
, disconnect the telephone line cord from the base
unit. Otherwise the
“
Cell line only mode
”
cannot be activated.
1
{
MENU
}
(
157
2
To turn on:
{
r
}
:
“
On
”
s
{
SELECT
}
s
{
r
}
:
“
Yes
”
s
{
SELECT
}
To turn off:
{
r
}
:
“
Off
”
s
{
SELECT
}
Link to cell
TGE46x47x_QG(en).fm Page 5 Monday, November 16, 2015 5:01 PM