Voice Mail
Problem
Cause/solution
“
Voice mail msg. via
phone co.
”
is shown on the
handset display. How do I
remove this message from the
display?
R
This notification is displayed when your service provider/
telephone company’s Voice Mail service (not the unit’s
answering system) has recorded a message for you.
Typically you can remove this notification from the display
by listening to the message. To listen to the message, dial
the Voice Mail number provided by your service provider/
telephone company (for most cases, this will be your own
phone number), and follow the voice instructions.
Depending on your service provider/telephone company,
you may need to remove all messages from your voice
mailbox to remove the notification. You can also remove
this notification by pressing and holding
#
until the unit
beeps.
Liquid damage
Problem
Cause/solution
Liquid or other form of moisture
has entered the handset/base
unit.
R
Disconnect the AC adaptor and telephone line cord from
the base unit. Remove the batteries from the handset and
leave to dry for at least 3 days. After the handset/base
unit are completely dry, reconnect the AC adaptor and
telephone line cord. Insert the batteries and charge fully
before use. If the unit does not work properly, contact an
authorized service centre.
Caution:
R
To avoid permanent damage, do not use a microwave oven to speed up the drying process.
74
Useful Information
TGE26x_27xC(en)_1224_ver012.pdf 74
2013/12/24 15:43:33
