– 9 –
Using a Bluetooth wireless headset (optional) for landline calls
By pairing a Bluetooth headset to the base unit, you can have a hands-free conversation wirelessly
for landline calls.
L
Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular
lines, or the headset and 1 cellular line).
Pairing a headset to the base unit
1
Your headset:
Set your headset to pairing mode.
L
Refer to your headset operating instructions.
2
Handset:
{
MENU
}
(
621
1
Pair using the handset.
2
Paring
3
If your headset PIN is “
0000
”,
go to step 4.
If your headset PIN is other than “
0000
”,
press
{
CLEAR
}
, then enter your headset PIN.
L
Typically, default PIN is
“
0000
”
. Refer to the headset operating instructions.
4
Press
{
OK
}
, then wait until a long beep sounds.
s
{
OFF
}
L
When the HEADSET indicator on the base unit lights up, you are ready to use the headset.
Operating a Bluetooth wireless headset using a landline
Refer to your headset operating instructions for headset operations.
N
Answering landline calls with your headset
To answer a landline call, turn on your headset referring to your headset operating instructions.
When you finish talking, turn off your headset referring to your headset operating instructions.
L
If you cannot hang up the call using your headset:
−
press
{
P
}
(STOP) on the base unit. (KX-TGE260 series)
−
press
{s}
on the base unit 2 times. (KX-TGE270 series)
N
Switching between the base unit and your headset
You can switch between the base unit and your headset:
−
during a landline call with the base unit speakerphone. (KX-TGE270 series)
−
during an intercom call between the base unit and handset. (KX-TGE270 series)
−
while listening to messages recorded on the base unit answering system.
To switch to your headset:
Turn on the headset referring to your headset operating instructions.
To switch to the base unit (KX-TGE270 series):
Press
{s}
on the base unit.
Using Bluetooth devices
2
1
TGE26x_27x_QG(en).fm Page 9 Wednesday, December 11, 2013 9:03 PM
