Charge for about 7 hours.
R
Confirm
“
Charging
”
is displayed (
2
).
R
When the batteries are fully charged,
“
Fully charged
”
is displayed.
2
1
4
2
3
1
3
Note:
R
If the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends (
,
) and the charge contacts with a dry cloth and
charge again.
Removing the battery
1
2
Registering a handset to a base unit
1
Base unit:
Press and hold
M
LOCATOR
N
for about 5 seconds.
R
If all registered handsets start ringing, press
M
LOCATOR
N
again to stop,
then repeat this step.
2
Handset:
Place the handset on the charger, then wait until a long beep sounds and
is displayed.
Note:
R
If an error tone sounds, or if
is displayed, register the handset according to
the base unit’s operating instructions.
Installation
0531_TGDA99C_(en)_OI_ver010.pdf 7
5/31/2023 9:33:53 AM
For assistance, visit www.panasonic.ca/english/support
7