1
2
Note:
R
The handset display may show
“
Please wait for 1 minute.
”
when the
handset is placed on the charger if it is not registered to the base unit.
R
If the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends (
,
) and the charge contacts with a dry cloth and
charge again.
Registering the handset to the base unit
Ensure that the handset is switched on. If it is not on, press and hold
M
OFF
N
for few
seconds to turn the handset on.
1
Handset:
Lift the handset and press
M
OFF
N
.
2
Base unit:
Press and hold
M
N
for about 5 seconds.
R
If all registered handsets start ringing, press
M
N
again to stop, then repeat
this step.
3
Handset:
Place the handset on the base unit or charger.
R
Continue the operation even when the handset display shows
“
Please
wait for 1 minute.
”
.
4
With the handset still on the base unit or charger, wait until a confirmation tone
sounds and
is displayed.
Note:
R
If an error tone sounds, or if
is displayed, register the handset according to
the base unit’s operating instructions.
4
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Installation
TGDA30E(en-en)_1225_ver021.pdf 4
TGDA30E(en-en)_1225_ver021.pdf 4
2014/12/25 13:57:45
2014/12/25 13:57:45
