Panasonic KX-TGD583, Руководство по установке

Страница: 13 / 32

Adding call blocked numbers from
the caller list
Please change the operating procedure in
step 3 instead of pressing
M CALL BLOCK N
n When a cellular phone is not paired:
M MENU N a MbN : “
Save call block
”
a M SELECT N
n When a cellular phone is paired:
M SELECT N a M SAVE N a MbN : “
Call
block ” a M SELECT N
Differences in call block operations
You need to access the following features by
using the direct command code or scrolling
through the display menu instead of pressing
the
M CALL BLOCK N button, then continue the
operation according to your base unit’s
operating instructions.
n Using the direct command code:
Feature Code
– Adding call blocked
numbers manually
– Storing a range of number
– Viewing/editing/erasing
call block numbers
– Erasing all call block
numbers
M MENU N
#217
– Blocking incoming call
that have no phone
number
M MENU N
#240
– Turning the first ring on/
off
(Setting not to ring once
for blocked call)
M MENU N
#173
– Displaying and clearing
the blocked call count *1
M MENU N
#177
*1 This feature is not available depending
on your base unit.
n
Scrolling through the display menu:
M MENU N a MbN : “ Settings ” a
M SELECT N a MbN : “
Call block
” a
M SELECT N
Automated call block
Differences in automated call
block operations
There is no M CALL BLOCK N button on
KX-TGTA61. You need to access the following
features by using the direct command code or
scrolling through the display menu instead of
pressing the
M CALL BLOCK N button, then
continue the operation according to your base
unit’s operating instructions.
n Using the direct command code:
Feature Code
– Setting the automated
call block
M MENU N
#787
– Changing the access
code
M MENU N
#789
– Displaying and clearing
the blocked call count
M MENU N
#790
– Viewing/erasing an entry
– Erasing all entries M MENU N
#794
– Recording a greeting
message for automated
call block
M MENU N
#791
– Resetting to the
pre-recorded greeting
message for automated
call block
M MENU N
#793
– Playing back the greeting
message for automated
call block
M MENU N
#792
n Scrolling through the display menu:
M MENU N a MbN : “ Settings ” a
M SELECT N a MbN : “
Automated call
block
” a M SELECT N
For assistance, please visit http://shop.panasonic.com/support 13
Feature differences
TGTA61(en)_0731_ver110.pdf 13 2018/07/31 18:41:44